Crowdsourced Bathymetry Manual (working version)

This version of the manual is currently being updated in preparation for the 2027 CSBWG meeting.

Glossary Authorship and acknowledgements Goals and objectives Definition and important uses ...

Abbreviations

CSB - Crowdsourced bathymetry CSV - Comma separated values DCDB - IHO Data Centre for Digital B...

Glossary

B-12 B-12 - IHO Guidelines for Crowdsourced Bathymetry is an IHO guidance document created by th...

Authorship and Acknowledgements

Commissioned following the 16th annual meeting of the IHO Crowdsourced Bathymetry Working Group (...

Definition and important uses of CSB

The International Hydrographic Organization (IHO) defines Crowdsourced Bathymetry (CSB) as "th...

So you want to start a CSB program?

As outlined above, the goal of this document is to create a centralized source of information reg...

Finding Your Crowd

This section is designed to help guide a program creator through the process of finding vessels t...

Vessel features

The suitability of a vessel for CSB depends on both its onboard hardware and the engagement of it...

Motivating vessels and overcoming hesitation

Depending on a vessel’s ownership, motivations to participate in CSB may be vastly different. Bas...

Maintaining vessel engagement

Tools to maintain vessel engagement may include communication and contact, personalization of mis...

Recruitment and onboarding

When initiating engagement with a recruited vessel, it is important to include information about ...

Hardware Options

For ease of explanation, we will divide data loggers into “First Generation” and “Next Generation...

First generation loggers

First generation data loggers are characterized by the need to un-install an SD card from the log...

Next generation and WiFi enabled loggers

Next generation data loggers are characterized as having more than just an SD card to eject and m...

Comparison of logger options

Depending on a CSB program’s needs at a given time, one type of logger may be preferred over anot...

Installation and Setup

Should there be a brief paragraph explaining the purpose of the chapter - ie: to describe the ins...

Installation prep

At least a week before an installation is scheduled, check that the installation kit and equipmen...

Installation Kit

Prior to leaving for a logger installation, ensure that the installation kit contains the followi...

Installation guide: OFM

OFM has provided detailed Installation and Operating Instructions for their Mussel Kits. A hard ...

Installation guide: YDVR

Locate NMEA 2000 backbone or T-connector with an open port. If a port is available, simply plug...

Installation guide: NEMO30/WIBL

Confirm that the NMEA network starts when the vessel is powered on. Remove the backplate/cover...

Collecting metadata

When installing data loggers, it is important not only to focus on the data that is being collect...

Data Retrieval and Management

Should there be a brief paragraph explaining the purpose of the chapter

Frequency of data transfer

Depending on logger type, CSB data will be transferred at varying intervals. For first-generation...

Offload mechanisms

The method of retrieving data varies with the type of logger. For first‑generation loggers, or wh...

Data Transformation and Submission

Should there be a brief paragraph explaining the purpose of the chapter

WIBL and YDVR data processing

Getting Set Up You will need to install the following programs to run the WIBL processing script...

Submission of GEOJSON data to the DCDB

All data submitted to the DCDB need to be in .geojson (preferred) or XYZ format and contain appro...

Graphical user interface

As of March 2025, a Graphical User Interface (GUI) is being developed to aid in the processing an...

Data Extraction and Processing

If your stakeholders would like to see and access the data they contributed, it may become pertin...

NCEI/DCDB data extraction

Perform the following steps to extract CSB data from the DCDB: Go to the IHO Data Centre for D...

Pydro tidal corrections

Support Contact: Anthony Klemm, NOAA Office of Coast Survey anthony.r.klemm@noaa.gov A Windows ...

Data Visualization

Tidal-corrected data should be edited using GIS software and uploaded to a central location which...

ArcGIS: Editing tide-corrected CSB data

For Trusted Nodes that have access to ESRI software licenses, tide-corrected CSB data can be edit...

ArcGIS: Generating CSB data shapefiles

This section provides instructions on how to export shapefiles of CSB data for specific participa...

QGIS: Editing tide-corrected CSB data

For Trusted Nodes that prefer to use free and open-source GIS software, the following section des...

QGIS: Data visualization

Motivation Some crowdsourced bathymetry participants may have a clear idea of how they intend to...

Use Cases and Effective Communication

NOAA data scrape

In 2025, NOAA Hydrographic Systems and Technology Branch, in collaboration with University of New...

Tampa Bay community mapping efforts

NOAA’s hydrographic health model is a risk-based framework that evaluates the safety of navigatio...

Templates

Example recruitment email for stakeholder meeting

For inaugural stakeholder meeting: [Fill in highlighted areas with details appropriate to your o...

Example stakeholder meeting agenda

For inaugural stakeholder meeting: Crowdsourced Bathymetry (CSB) in Tampa Bay/Florida Devel...

Example stakeholder input session prompts