Recently Updated Pages

Perform the following steps to extract CSB data from the DCDB: Go to the IHO Data Centre for D...

Support Contact: Anthony Klemm, NOAA Office of Coast Survey anthony.r.klemm@noaa.gov  Perform th...

All data submitted to the DCDB need to be in .geojson (preferred) or XYZ format and contain appro...

Glossary Authorship and acknowledgements Goals and objectives Definition and important uses ...

At least a week before an installation is scheduled, check that the installation kit and equipmen...

Locate a NMEA 2000 backbone or T-connector with an open port. If a port is available, simply pl...

When installing data loggers, it is important not only to focus on the data that is being collect...

OFM has provided detailed Installation and Operating Instructions for their Mussel Kits.  A hard ...

Prior to leaving for a logger installation, ensure that the installation kit contains the followi...

Next Generation loggers are characterized as having more than just an SD card to eject and manual...

Depending on a CSB program’s needs at a given time, one type of logger may be preferred over anot...

First Generation loggers are characterized by the need to un-install an SD card from the logger a...

The suitability of a vessel for CSB depends on both its onboard hardware and the engagement of it...

This section is not intended to provide legal advice, but rather to provide examples of some comm...

 The International Hydrographic Organization (IHO) defines Crowdsourced Bathymetry (CSB) as the...

This document was commissioned out of the 16th annual meeting of the Crowd Sourced Bathymetry Wor...

B-12 A guidance document created by the CSBWG and IHO to provide an outline of the technical “ho...

Getting Set Up You will need to install the following programs to run the WIBL processing script...

 The International Hydrographic Organization (IHO) defines Crowdsourced Bathymetry (CSB) as the...

This section is not intended to provide legal advice, but rather to provide examples of some comm...